A water pressure tank is used to increase the water pressure. Check the PSI before you install a pressure tank. If you require more pressure, a 100 PSI water pressure tank will be the best. There are also several categories of PSI water pressure tanks.
Amtrol Well-X-Trol, WaterWorker and WellMate are famous for their water pressure tanks. Below, 9 Best 100 PSI water pressure tanks are explained.
Amtrol WX-103 (142PR1), 7.6 Gal WELL-X-TROL In-Line Well Tank
The most well-known model for water pressure tanks is Well-X-Troll. Its Amtrol WX-103 (142PR1) is constructed of stainless steel that is high-strength stainless steel. The inner liner is made of Virgin polypropylene, which won’t chip, flakeor crack or peel. Diaphragm design isn’t likely to be ripped or collapsed.
Amtrol WX-104 (143S75), 10.3 Gal WELL-X-TROL In-Line Well Tank
The diaphragm of butyl is 100% resistant to corrosion. They included a virgin polypropylene liner. For the diaphragm’s securement, they used a positive hoop seals that provide durability and the strength.
Deep-drawn steel domes technology gives double strength, and reduces the weight. Because of this, instead of having more in length and diameter, the weight is 20lbs.
Amtrol WX-202 (144S29), 20 Gal WELL-X-TROL Well Tank
Amtrol WX 202 pressure tank capacity is 20 gallons. This is enough to fill a two or one story houses. To avoid the loss of pressure in the air the manufacturer permanently welded the air valve. It also lessens the stress on the pump.
Since, the tank capacity is big enough, so you can use it as a sprinkler system pressure tank.
Liner material is made of virgin polypropylene. Diaphragm material comes from heavy duty butyl that guarantees you that there is no collapse, crack or tear of diaphragm.
WELLMATE WM6 WM-6 20 gallon pressure tank
WellMate is also famous for its pressure tank. They utilized an air cell in WM6 that is extremely durable and repairable. The air is composed of engineered polymer with a heavy gauge.
It’s simple to install requires only one plumber and a few hours. Therefore, the cost of installation is also lower.
In corrosive environments, it will not get rusty so you can use it as an outdoor well pressure tank. It is recommended for coastal regions. The company offers a long warranty on labor.
Amtrol WX-203 XTrol Stand Well Water Tank, Blue
The model of the Amtrol Well-X-Trol WX203 comes with a closed air charges. The water chamber is designed distinctively. The coating technology used by the brand is outstanding.
Drawdown volumes are 10.9 gallons when you choose 30/50 or 9.4 Gallons if you choose to set 40/60. The diaphragm itself is made from butyl rubber. Therefore, the durability of the diaphragm is long.
The inner liner is constructed of virgin polypropylene to ensure it doesn’t scratch, crack, or peel. Diaphragm is held in place by a an hoop seal that is positive.
You may also know Bladder Tank vs Pressure Tank.
WaterWorker 25009 Vertical Well Tank 20-gallon
WaterWorker is a most well-known manufacturers of water pressure tanks. WaterWorker’s WaterWorker 25009 20-gallon Pressure Tank is a well-known model of WaterWorker.
In this case, the manufacturer makes use of diaphragms to divides air and water. The diaphragm itself is made of butyl and the polypropylene liner won’t break, peel or chip. This means that the tank won’t cause negative impact on water.
The manufacturer of the product meets all standards of the ANSI/NSF Standard. This means that it does not contain any dangerous element that could harm health.
Read More About 7 Best Water Pump For Drip Irrigation
WaterWorker HP-32B, Vertical Pressure Tank, 32-Gallon Capacity Blue
The diaphragm is constructed of butyl-composite and the thick diaphragm is used to separate air from the water. Therefore, water is safe and comes with NSF certification.
The size of the connection is 1 inch is NPT compatible and the connection doesn’t make use of any plastic.
It can be used for hot tubs, as well as to use it outdoors, such as sprinklers.
WaterWorker 153921, 44Gal Vertical Well Tank 44 Gallon
The tank’s designed and manufactured in accordance with NSF regulations and rules. The diaphragm itself is made from butyl. It is a completely seamless so that the diaphragm won’t experience any stretch.
The tank is finished with high gloss enamel which shields the tank from damage by other elements.
Drawdown: 11.78 Gallons when the settings are 40/60, and 13.6 Gallons when setting 30/50.
Sometimes the water in the tank’s outlet might appear to be brown. This could be due to the tank’s insides became coated with rust or some other thing. In reality, it’s very uncommon so don’t fret about it.
WaterWorker HD20HB Water Worker Ht-20Hb Horizontal Well Pre-Charged Tank 20 Gallon
Most of the water pressure tanks are vertical. However, the WaterWorker The HT20HB is horizontal. The dimension is 16 inches and it’s width 29 inches and the height is 17 inches.
The tank’s weight is just 28.4 pounds, which is quite small. The tank’s capacity of the tank is around 20gallons. Residentially, it’s better.
Another benefit is that you do not have to replace the liner often.
How we select these products
When we selected the 100 psi pressure tank then we strictly followed the tank should be 100 psi or more than 100 psi. For user satisfaction, we keep two kinds of pressure tanks a. Vertical and b. Horizontal. and also keep notice of the pressure tank capacity and material. To provide the best list we also take user opinions.